638B03 Standalone Servo Drive/Controller : 2.5A / 3*230-480VAC (2.6kVA) OBSOLETE

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: The 638B03 servo drives are suitable for all servo applications, from simple speed or current control to complex positioning applications. With an output rating of 2.6kVA and numerous expansion slots, these drives offer a high degree of versatility
Тип продукта: Servo Drive
Тип вала привода: Single Axis Technology
Серия продуктов: 638
Напряжение на входе: 3*230VAC3*400/480VAC
Номинальный ток на выходе в непрерывном режиме работы: 2.5A
Совместимый тип гидромотора: Brushless ServoDirect Drive Servo
Совместимое устройство обратной связи: ResolverIncremental EncoderEnDat Absolute EncoderHiperface Absolute Encoder
Режимы управления: Programmable Control - Proprietary LanguageElectronic GearingElectronic CAMPosition Control (External Command)Velocity Control (External Command)Torque Control (External Command)Analog Command InputStep/Direction Command Input
Интерфейс связи: RS232 / RS485CANopenProfibus
Рабочая температура: 0 - 40 °C, 32 - 104 °F
Соблюдены требования технических условий: CE (EMC & LVD)UL ListedcUL ListedRoHS Compliance
Бренд: Parker
638 series servo drives are suitable for all servo applications, from simple speed or current control to most complex positioning applications. The processor of 638 series servo drives gives a rapid response time to the control circuits of 105 μs. Numerous expansion slots allow 638 series servo drives to reach a high degree of versatility, opening access to a wide variety of fieldbus communication and feedback sensors options.

Features:
• Integrated motion controller
• 230 or 400 VAC direct power supply
• STO: Safety torque off in accordance with EN13489-1 Category 3, Performance Level d and EN1037 as standard
• Ultra-fast control loops (105 μs)
• Embedded PLC functions
• Programmable electronic cam
• 3 configurable trajectory generators
• Multi-axis synchronization through process bus
• Numerous fieldbuses options
• Hiperface and SSI encoder inputs options
• Optional flash memory chip for data storage
• Simple commissioning and programming software

638B03 Servo Drives Overview:
Supply Voltage : 3*230 VAC (±10 %) / 3*400/480 VAC (±10 %), 50 - 60 Hz
Continuous Current : 2.5 Arms
Peak Current : 5 A
Overload : 200 % for 5 secs
Operating Temperature : 0 - 40 °C
Humidity : < 85 % relative humidity, non-condensing
Altitude : 1000 m (1 % derating per 100 m up to 4000 m)
Product Enclosure Rating : IP20

Input / Outputs (X10 Plug):
• 8 Digital inputs (24 V) including 2 interrupts
• 5 Digital outputs (24 V) including 3 opto-coupled (configurable) and 2 relays (1 configurable, 1 for drive ready)
• 2 Analog inputs (0 - 10 V, ±10 V)
• 2 Analog outputs (±10 V)

Configurable Feedback Interface (X30 plug):
• Resolver input (standard)
• Hiperface encoder input (option)
• Sine / Cosine encoder input (option)

Optional Flash Memory Chip (X300 - module):
• Storage of complete drive data (firmware, function code, parameters, applications program)

Configurable Multi-Function Interface (X40 plug):
• Incremental encoder input
• Incremental encoder output
• Stepper-motor input
• Absolute single or multi-turn SSI encoder input Communication
• Serial communication (COM1 Interface) RS232
• Application communication (COM2 Interface)
• RS232, RS422, RS485
• Profibus-DP
• CANopen DS402
• Inter axis communication (COM3 Interface) Parker System bus / RS485

I/O Extension:
• 5 Digital Inputs / 2 Digital Outputs (COM2 Interface)
• 14 Digital Inputs / 10 Digital Outputs (X200 Plug)
• 4 Digital Inputs / 4 Digital Outputs (X120 Plug)

Safety:
• STO: Safety torque off in accordance with EN13489-1 Category 3, Performance
Level d and EN1037 as standard (connector STO X11)
• Brake / PTC output (BR/TH X62 Plug)

Standards & Conformance:
• CE marked:
• EN61800-3 (EMC compliance) with integral filter
• EN50178 (Safety, low voltage)
• UL certification