IQAN-MDL2 Master Display module OBSOLETE

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: Примечание: Этот продукт больше не доступен - пожалуйста, свяжитесь с нами для получения дальнейшей помощи.
Напряжение источника питания: 11-32 VDC
Максимальная рабочая температура: 70 °C
Минимальная рабочая температура: -30 °C
Количество входов: 12
Количество выходов: 8
Степень защиты, обеспечиваемая оболочкой: X3
Соблюдены требования технических условий: 2004/108/EC
Электрические соединения: AMP/Tyco
Тип дисплея: 6.5" Color TFT
Интерфейс связи: 4xCAN, USB, RS232
The IQAN-MDL2 is a central unit that works with a variety of expansion modules in an IQAN control system. The IQAN-MDL2 works as a master, displays information, provides a data gateway and has a variety of flexible I/O channels.
The IQAN-MDL2 is intended for the in-cab environment and will display vehicle data and system information. In most applications the display will replace all mechanical dial type instruments.
The IQAN-MDL2 has multiple inputs and outputs for measurement and control of hydraulic systems. The different input types are voltage, on/off, directional frequency (quadrature) and frequency. The outputs are proportional and on/off. The unit also has 4 CAN interfaces, all of which are user configurable.
The IQAN-MDL2 has a large internal memory for events and logging that is power fail-safe protected.
The IQAN-MDL2 has a 6.5” transflective TFT color display.
The IQAN-MDL2 has 2 proportional outputs that can be configured as current mode (current closed-loop) or PWM mode (voltage open-loop) signals. These outputs can control two bi-directional valve sections or two single solenoid devices (ie. proportional cartridge valves). The parameters are configured using IQAN software. For flexibility these outputs may also be configured as up to 2 on-off outputs and up to 4 on-off inputs.
The unit also has six (6) on-off outputs that are high-side power outputs. The high-side outputs may not be configured as proportional.
The IQAN-MDL2 has eight (8) voltage inputs to accept 0-5V signals from input devices or sensors. These inputs can also be set up as on-off inputs. There are 4 digital on-off inputs for switches. The digital inputs may be configured to accept one frequency or one directional frequency (quadrature) input.
The IQAN-MDL2 is connected to other units by 4 CAN buses. All CAN buses may be configured as ICP (IQAN CAN Protocol), SAE J1939 or Generic CAN (user defined). The unit supports RS232 for external modem, IQAN-G1 connection and USB, RS232 or CAN for communication with a PC.
The IQAN-MDL2 is in phase-out status and is not recommended for new installations.