IQAN-XP2 expansion controller module OBSOLETE

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: Примечание: Этот продукт больше не доступен - пожалуйста, свяжитесь с нами для получения дальнейшей помощи.
Напряжение источника питания: 9-32 VDC
Максимальная рабочая температура: 70 °C
Минимальная рабочая температура: -30 °C
Количество выходов: 8
Степень защиты, обеспечиваемая оболочкой: IP65
Соблюдены требования технических условий: 2004/108/EC
Электрические соединения: AMP/Tyco power timer
Номинальный ток на выходе: 1800 mA
Материал корпуса: Aluminum
Промышленность: Agriculture, Construction, Forestry, Material Handling, Specialty, Transportation
Тип контроллера: Slave/expansion module
The IQAN-XP2 module is one of a collection of expansion/slave controllers that can be added to an IQAN system. The IQAN expansion module communicates with an IQAN master display or controller over a CAN bus. The module has addressing in the wiring harness through use of an IDtag; the addressing of the IQAN-XP2 allows up to 8 modules of this type on the bus. The XP2 is a mature product in phase-out status and is not recommended for new applications.
The IQAN-XP2 expansion module has up to 4 voltage inputs for connection of 0-5 Vdc signals, up to 4 digital inputs for on-off signals and up to 2 frequency inputs. Inputs are multi-purpose and share pins for flexibility. The inputs are configured as voltage inputs, digital inputs or as frequency inputs using IQAN software tools.
The IQAN-XP2 module has 4 double current PWM (Pulse Width Modulation) outputs that are regulated for controlling proportional valves. The module also has 4 digital outputs for on/off valves which can also be configured as either 4 individual, or 2 double PWM outputs for non-regulated control of proportional valves and devices. The digital and PWM outputs share pin positions and are configured using IQAN software tools.
The IQAN-XP2 aluminum housing is designed to be rugged, but light and has a sealed, automotive connector. The unit has a membrane to prevent condensation inside the housing. The IQAN-XP2 expansion controller is designed for the outdoor environment.
IQAN-XP2 expansion modules execute a self-test during start up and cyclic operation. An internal watch dog checks for software errors and will interrupt outputs if errors are detected. The XP2 is made using selected components and conforms to strict international requirements. For diagnostics: If an error is detected an LED on the top of the controller flashes a sequence to indicate the nature of the error and assist in troubleshooting.