IQAN-XS2 expansion controller module

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: IQAN-XS2 expansion modules can be added to an IQAN system. The XS2 has voltage and digital inputs. The outputs are digital . The XS2 expansion module communicates with an IQAN master module over a CAN bus connection.
Напряжение источника питания: 9-32 VDC
Максимальная рабочая температура: 70 °C
Минимальная рабочая температура: -30 °C
Количество входов: 8 (20)
Количество выходов: 12
Степень защиты, обеспечиваемая оболочкой: IP65
Соблюдены требования технических условий: 2004/108/EC
Электрические соединения: AMP/Tyco power timer
Номинальный ток на выходе: 1800 mA
Материал корпуса: Aluminum
Промышленность: Agriculture, Construction, Forestry, Material Handling, Specialty, Transportation
Тип контроллера: Slave/expansion module
The IQAN-XS2 module is one of a collection of expansion/slave controllers that can be added to an IQAN system. The IQAN expansion module communicates with an IQAN master display or controller over a CAN bus. The module has addressing in the wiring harness through use of an IDtag; the addressing of the IQAN-XS2 allows up to 8 modules of this type on the bus.
The IQAN-XS2 expansion module has up to 8 voltage inputs for connection of 0-5 Vdc signals and up to 20 digital inputs for on-off signals. Inputs are multi-purpose and share pins for flexibility. The inputs are configured as voltage or digital inputs using IQAN software tools.
The IQAN-XS2 has 12 dedicated on-off outputs that are high-side power outputs.
The IQAN-XS2 aluminum housing is designed to be rugged, but light and has a sealed, automotive connector. The unit has a membrane to prevent condensation inside the housing. The IQAN-XS2 expansion controller is designed for the outdoor environment.
IQAN-XS2 expansion modules execute a self-test during start up and cyclic operation. An internal watch dog checks for software errors and will interrupt outputs if errors are detected. The XS2 is made using selected components and conforms to strict international requirements. For diagnostics: If an error is detected an LED on the top of the controller flashes a sequence to indicate the nature of the error and assist in troubleshooting.