Refrigerant Sensors- HBLC Series

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: HBLC-CO2 and HBLC-HFC refrigerant sensors are designed for the measurement of CO2 and HFC refrigerant level in chillers, evaporators and condensers.
Номер модели: Please Configure Part for Model Number
Тип продукта: CO² Level Transmitter, HFC Level Transmitter
Длина: 150 to 3000 mm, 6" to 118" inch
Тип соединения: NPT or BSPP, Plug: M12, 5 pins - DIN 0627
Напряжение на входе: 24 AC/DC + 10%+E4:O4
Допустимый уровень энергии: Max 50 mA
Сигнальный выход: Analog: 4-20 mA
Тип аварийного сигнала: PNP/NPN
Минимальная температура окружающей среды: -30 °C, -22 °F
Максимальная температура окружающей среды: 50 °C, 122 °F
Минимальная температура жидкости: -55 °C, -67 °F
Максимальная температура жидкости: 30 °C, 86 °F
Максимальное рабочее давление: 150 bar
Степень защиты, обеспечиваемая оболочкой: IP65
Вибростойкость: IEC 68-2-6 (4g)
Размер резьбы фитинга: 20 mm, 3/4" inch
Материалы изготовления: Liquid Parts- AISI 304/ PTFE~ Electronic Parts-Nylon 6 (PA)
Тип индикатора: LED 1 x green- 1 x yellow- 1 x red
Соблюдены требования технических условий: EMC Test- EN 61000-2
Дополнительное оборудование входит в комплект: Included- HBxC-M12/5
Тип кабеля: PUR- 5 x 0.34mm²
Parker’s HBLC refrigerant sensors have been optimized to be used with CO2 and HFC refrigerants. These sensors provide consistent performance in all applications and can be ordered pre-configured to a specific length. The HBLC sensor features an intelligent split design that allows the electronic portion to me removed and replaced while leaving the mechanical portion installed on the pressure containing vessel. The HBLC also features a convenient and easy to read LED display. These sensors supply a 4-20 mA signal proportional to the amount of liquid present in the vessel they are installed in.

Markets:
• Industrial Refrigeration
• Commercial Refrigeration

Features and Benefits:
• Complete solution with sensor and transmitter in one unit.
• Simple to install by one thread sleeve. A cost optimized solution
• LED indication of power supply and alarm status
• Unique split design which make it easy to install and make diagnostic. The electronic part can easily be dismounted from the mechanical part by 2 small screws.

Application:
• Chillers
• Evaporators
• Condensers