Санкт-Петербург
-
Parker
-
Краткое описание: Modern mobile equipment calls for a hydraulic fluid ensuring profitable and reliable operation.
Для типа жидкости: Synthetic Oils, Water/Oil Emulsions, Petroleum
Рабочее давление: 25 bar, 375 psi
Технологии: Filtration, Hydraulics
Максимальная температура жидкости: 150 °C, 302 °F
Рабочая температура: -40 to 125 °C, -40 to 257 °F
Рабочая влажность: n/a
Подразделение: Hydraulic & Industrial Process Filtration Division EMEA
Промышленность: General Industrial
Тип продукта: Condition Monitor
Напряжение источника питания: Max. 60 VDC
Модель продукта: Viscosity Sensor
Расход: Recessed Position Recommended
Размер порта: M14x1.5
Тип порта: Metric
Метод измерения: Tuning Fork
Точность: n/a
Требования к электроснабжению: 12 to 24 VDC
Интерфейс связи: CAN J1939
Сигнальный выход: CAN Bus
Длительность цикла: 10 second
Соблюдены требования технических условий: CE Certification
Соблюдены требования ATEX: n/a
Степень защиты, обеспечиваемая оболочкой: IP67
Материалы изготовления: n/a
Материал уплотнения: Fluorocarbon
Материал корпуса: Stainless Steel
Вес: 350
Высота: 73 mm
Длина: 50 mm
Ширина: 30 a/f mm
Бренд: Parker
The FPS is a novel fluid property sensor that will directly and simultaneously measure the viscosity, density, dielectric constant and temperature of fluids. Relying on patented tuning fork technology, the sensor monitors the direct and dynamic relationship between multiple physical properties to determine
the quality, condition and contaminant loading of fluids such as engine oil, fuel, transmission and brake fluid, hydraulic, gears oils, refrigerants and solvents.
The multi-parametric analysis capability improves fluid characterization algorithms. The FPS provides in-line monitoring of fluids for a wide range of OEM and aftermarket installations including fluid reservoirs, process lines and pressurized high flow conduits (e.g., engine oil gallery) for applications that include on and off highway vehicles, HVAC&R, compressors, industrial equipment and turbines. A universal digital CAN J1939 compliant protocol provides easy to connect interface to main Host controller. A simple 4 pin connector allows for cost effective mounting options.
Important note
The Parker FPS does not use a “fingerprint” principle. Sensors using a “fingerprint” principle require up-front calibration in the fluid type subject to future analysis. This calibration can take up to 200 hours, during which time the aging of the oil can start and hence the calibrated reference is not accurate. When a different oil is applied, sensors using the “fingerprint” principle require new calibration. Parker's PFS sensor directly measures the important fluid properties without the need for calibration in-advance.
Advantages
• Continuously measurement of important fluid properties
• Early detection of fluid aging
• No up-front calibration required
• On board processor with real-time data analysis with 5, 10 or 24 volts supply
В связи с изменениями курсов мировых валют и пересмотром цен производителями, цены на товары могут отличаться от заявленных на сайте. Просьба актуальные цены уточнять у менеджера. Мы делаем все возможное, чтобы цены на сайте были актуальными.
Оперативно доставляем оборудование в любую точку РФ
Мы надежный партнер по поставкам промышленного оборудования
Прямые поставки от заводов и минимальная торговая наценка
Предоставляется официальная гарантия завода-изготовителя
Огромный список заводов-изготовителей, с которыми мы сотрудничаем
С нами Вы уверены в качестве поставляемого оборудования
Наш менеджер поможет вам с поиском оборудования
и запчастей, ответит на любые вопросы.