ViX500 Microstepper Drive/Indexer : 8.0Apk / 48-80VDC OBSOLETE

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: Примечание: Этот продукт больше не доступен - пожалуйста, свяжитесь с нами для получения дальнейшей помощи.
Тип продукта: Stepper Drive
Тип вала привода: Single Axis Technology
Серия продуктов: ViX
Напряжение на входе: 48 - 80VDC
Номинальный ток на выходе в непрерывном режиме работы: 5.6A rms / 8.0A pk
Совместимый тип гидромотора: 2-Phase Stepper
Рекомендуемая индуктивность гидромотора: 0.5 - 20mH
Разрешение: 51200 steps/rev
Совместимое устройство обратной связи: Incremental Encoder (optional)
Режимы управления: Programmable Control - Proprietary LanguageElectronic Gearing/FollowingFeed Rate OverrideStep/Direction Command InputAnalog Command Input
Интерфейс связи: RS232 / RS485CANopen
Особенности: Stall Detect (with encoder)Position MaintenanceHigh-Speed RegistrationLoad Mounted EncoderScaling (in user units)User VariablesAutomatic Standby Current Reduction
Рабочая температура: 0 - 50 °C, 32 - 122 °F
Соблюдены требования технических условий: CE (EMC & LVD)UL RecognisedcUL RecognisedRoHS Compliance
Бренд: Parker
The intelligent ViX microstepper drive uses field-oriented digital control technology to give enhanced dynamic performance with improved efficiency. Housed within an extremely compact case, ViX stepper drives are suitable either for direct panel mounting or for attachment to a standard DIN rail using an optional adaptor. The ViX microstepper drive is produced in two versions having current ratings of 2.8 A and 5.6 A RMS at motor bus voltages up to 80 VDC. User resolution is freely programmable between 400 and 51,200 steps/rev. Regardless of the programmed resolution, the motor always operates at maximum resolution for optimum smoothness over the entire speed range. The power stage features full PWM control for accurate microstepping performance.

ViX intelligent microstepper drives incorporate a powerful motion controller/indexer, using Parker's well-proven EASI command language. As well as carrying out all standard motion-related functions, the controller performs more advanced operations such as external encoder following and registration moves. All necessary configuration is performed by software. In addition to an RS232C interface which is included in the standard drive, an optional factory-installed fieldbus expansion module allows for both CANopen and RS485 communication. A comprehensive front-end software package is available which permits rapid configuration of the drive. When used with Parker stepper motors, only the motor type number is required for configuration of all relevant motor parameters.

ViX500 Microstepper Drive/Controller Features:
• Drive Input Supply : 48...80VDC
• Output Current : 5.6 Arms / 8.0 Apk
• Built-in Motion Controller/Indexer (using Parker's proven EASI code)
• Step/Direction/Analog Control
• Powerful EASI-V Front-End Software
• Fully-programmable resolution, up to 51200 steps/rev
• 2x Encoder Inputs (motor feedback - position maintenance/stall detect | electronic gearing/following)
• Optional CANopen/RS485 Interface
• Field-oriented control for improved low-speed performance
• Panel or DIN rail mounting
• Automatic standby current reduction
• Compatible with Parker high performance stepper motors

The ViX microstepper drive forms part of a new, fully-integrated system of motion control components which includes digital servo and stepper drives, power supplies, operator panels and I/O expansion units. These components complement Parker's range of mechanical positioning systems which includes precision tables, electric cylinders and linear actuators.