XL50 Ministepper Drives and Drive/Indexers : 5.0Apk / 48-80VDC OBSOLETE

Артикул

-

Бренд

Parker

Цена

-

Описание

Краткое описание: Примечание: Этот продукт больше не доступен - пожалуйста, свяжитесь с нами для получения дальнейшей помощи.
Тип продукта: Stepper Drive
Тип вала привода: Single Axis Technology
Серия продуктов: XL
Напряжение на входе: 48 - 80VDC
Номинальный ток на выходе в непрерывном режиме работы: 3.5A rms / 5.0A pk
Совместимый тип гидромотора: 2-Phase Stepper
Рекомендуемая индуктивность гидромотора: 0.8 - 10mH
Разрешение: 4000 steps/rev
Совместимое устройство обратной связи: None (open loop)
Режимы управления: Programmable Control - Proprietary LanguageStep/Direction Command InputAnalog Command InputIntegral Pulse Source
Интерфейс связи: RS232
Особенности: Automatic Standby Current Reduction
Рабочая температура: 0 - 50 °C, 32 - 122 °F
Соблюдены требования технических условий: CE (EMC & LVD)RoHS Compliance
Бренд: Parker
XL50 Series non-intelligent ministepper drives accept industry standard step/direction, step-up/step-down and 0-10V analog command signals. They also feature a built-in dual speed step-pulse generator which, with the addition of a few external components, permits stand-alone operation with local controls. XL50i Series intelligent stepper motor controllers incorporate a powerful indexer based on Parker's proven EASI control language. In addition to all standard motion control functions, the indexer can perform accurate registration moves for applications such as packaging and labelling. The use of pre-defined move profiles and labelled program blocks allows for more efficient programming and improves the response of the indexer by reducing execution time. Optimum noise immunity is assured by the use of PLC-compatible 24V input and output levels.

All XL/XLi ministepper drives feature programmable motor current down to 50% of the maximum value, automatic current reduction at standby, a choice of four resolutions between 400 and 4000 steps/rev and full protection against short circuits, overvoltage and excessive temperature rise.

XL50 Ministepper Drive/Controller Features:
• Drive Input Supply : 48...80VDC
• Output Current : 3.5 Arms / 5.0 Apk
• Step/Direction/Analog Control (with integral oscillator/pulse generator for stand-alone operation)
• Optional built-in Motion Controller/Indexer (using Parker's proven EASI code)
• Powerful EASI-Tools Front-End Software
• Programmable resolution, up to 4000 steps/rev
• Automatic standby current reduction
• Compatible with Parker high performance stepper motors